PLANET WAP-7500 - Manual (Page 33)

Chapter 4 Advanced Settings
4.1 Advanced Wireless Settings
Open “Radio” in “Wireless” and turn to “Advanced Parameters” at the bottom to make advanced
wireless settings.
Figure 23 Advanced Parameters
Radio
To enable or disable Wireless radio interface.
RTS Threshold
The WAP-7500 sends RTS (Request to Send) frames to certain receiving station and negotiates
the sending of a data frame. After receiving an RTS, that STA responds with a CTS (Clear to Send)
frame to acknowledge the right to start transmission. The setting range is 0-2346 in byte.
Fragmentation Length
Specify the maximum size in byte for a packet before data is fragmented into multiple packets.
Page 33