PLANET WAP-7500 - Manual (Page 32)

the data rate more effectively, but will take more bandwidth, thus cause possible interference.
TDM Coordination
Stands for “Time-Division Multiplexing Technique”, this resource reservation control mechanisms
can avoid packet collisions and send the packets much more efficiently allowing for higher effective
throughput rates. This function is only available in CSMA BS mode (RF2). It is highly
recommended to enable TDM coordination when there are multiple CPEs needed to connect to
the BS in your application.
NoACK
Under TDMA mode, enabling NoACK can enhance throughput but it might result in higher error
rates in a noisy environment.
WMM
WMM (Wi-Fi Multimedia) is a subset of 802.11e. It allows wireless communication to define a
priority limit on the basis of data type, thus those time-sensitive data, like video/audio data, may
own a higher priority than common one. To enable WMM, the wireless client should support it as
well.
Super Mode
Super mode is an effective way to enhance performance. It can boost the transmission data rate.
To enable Super Mode, the remote WAP-7500 should enable the function as well. For more
information you may refer to Super Mode in Chapter 4 Advance Settings .
Page 32