1 configure snmpv3 user profile, Figure 34 configure snmpv3 user profile – PLANET WNAP-7300 User Manual

Page 49

Get Community

Specify the password for the incoming Get and GetNext requests from the management station.

By default, it is set to public and allows all requests.

Set Community

Specify the password for the incoming Set requests from the management station. By default, it is

set to private.

Trap Destination

Specify the IP address of the station to send the SNMP traps to.

Trap Community

Specify the password sent with each trap to the manager. By default, it is set to public and allows

all requests.

5.1.1 Configure SNMPv3 User Profile

For SNMP protocol version 3, you can click “Configure SNMPv3 User Profile” in blue to set the

details of SNMPv3 user. Check “Enable SNMPv3 Admin/User” in advance and make further

configuration.

Figure 34 Configure SNMPv3 User Profile