beautypg.com

Figure 7 attach and fasten the removable cover, Figure 8 connect to poe injector – PLANET WNAP-7300 User Manual

Page 18

background image

4.

Attach and fasten the removable cover to the bottom of the WNAP-7300. When finished, you

can check the connection as the figure shown below.

Figure 7 Attach and fasten the removable cover

5.

Plug the power cord into the DC port of the POE injector as the figure shown below.

Figure 8 Connect to POE Injector

6.

Plug the other side of the Ethernet cable in the Step.4 into the POE port of the POE injector in

the Step.5, and get the complete set ready as the figure shown below.

- 8 -

See also other documents in the category PLANET Routers: