PLANET WNAP-7300 User Manual

Page 39

Data Rate

Usually “Auto” is preferred. Under this rate, the Wireless Outdoor WNAP-7300 will automatically

select the highest available rate to transmit. In some cases, however, like where there is no great

demand for speed, you can have a relatively-low transmit rate for compromise of a long distance.

Channel Mode

Four levels are available: 20MHz and 40MHz. The last one can enhance data throughput, but it

takes more bandwidth, thus it might cause potential interference.

Extension Channel Protection Mode

This is to avoid conflict with other wireless network and boost the ability of your device to catch all

legacy devices transmissions. However, it may decrease wireless network performance.

Compared to CTS-Self; the transmission amount of CTS-RTS is much lower.

Enable MAC Clone

Available only under wireless client mode, it hides the MAC address of the WNAP-7300 while

displays the one of associated wireless client or the MAC address designated manually.