PLANET ICA-HM620 - Manual (Page 96)

Note
To make the Dome Camera tilt between a specific range, such as -10° to +100° or -10° ~
+190°, please go to the Tilt Range setting page to set the tilt angle range. Otherwise, the
Dome Camera will tilt 90° as the default setting.
• M.E. Mode
M.E. is a standard mechanical operation. As the Dome Camera tilts to the maximum angle, it will pan
180°, and then continue tilting to keep tracking objects.
Digital Zoom
The network Speed Dome Camera can supports up to 12× Digital Zoom. Press the button “Set” to save
the setting.
Speed by Zoom
Enable this function to adjust the pan/tilt speed automatically by internal algorithm when zooming. The
larger zoom ratio leads to the lower rotating speed. Click on button to save the setting.
ICR Function
With the IR cut filter, the camera can still catch clear image at night time or in low light conditions.
• Auto
In the Auto mode, the internal circuit will automatically decide the occasion to remove the IR cut filter
according to the image brightness level.
• On
Select the item to remove the IR cut filter.
• Off
Select the item to disable IR function.
4.5.11 Camera - Miscellaneous Setups Menu 2
The Miscellaneous Setting Menu 2 can be found under this path: PTZ> Camera- Misc 2.
In the Camera—Misc (Miscellaneous) Setups Menu 2, users can setup various functions such Wide
Dynamic Range (WDR), Auto Calibration, 2D Noise Reduction (2DNR), and TV System.
- 96 -