PLANET ICA-HM620 - Manual (Page 89)

• Sequence Line
Please select the number of Sequence Line to be set from the drop-down list in the top of the Sequence
setting menu.
• Sequential Preset Points Setting
Please setup each Preset Point of the programmed Sequence Line in order, assigning a Preset Point
from the “Name” list for the specified number of Preset Point and entering both Dwell Time (0~225) and
Speed (0~20) into the corresponding fields.
When finishing the sequential Preset Points setting, please click the button “Save” in the top of the
Sequence setting menu.
Sequence Run
Select the specified Sequence Line from the drop-down list, press the “Go” button, and then the
camera will start moving forward each scene sequentially as programmed.
To view the camera executing a Sequence Line in full screen mode, please move the cursor onto the
live view pane, right-click and left-click to select “fullscreen”. Then users can view the camera
navigation in full screen.
To stop running the Sequence Line, simply move the cursor to the live view pane and move the camera
in any direction.
- 89 -