PLANET ICA-HM620 - Manual (Page 47)

• Enable Traps
Check the box to activate trap reporting.
• Trap address
Enter the IP address of the management server.
• Trap community
Enter the community to use when sending a trap message to the management
system.
Trap Option
• Warm Start
A Warm Start SNMP trap signifies that the SNMP device, i.e. IP Camera, performs
software reload.
Click on button when complete.
4 . 3 . 3 . 4 U P n P
The UPnP setting can be found under this path: System> Network> UPnP.
UPnP Setting
z Enable UPnP
- 47 -