PLANET ICA-HM620 User Manual
Page 30
focus near, far or automatically.
Run Preset/ Cruise/ Sequence
After setup the Preset/ Cruise/ Sequence lines according to PTZ Settings, select a Preset/ Cruise/
Sequence line and start it by clicking on the
/
/.
).
PT Speed (1~10)
Set a number between 1 and 10 as the PT Speed every time users pan or tilt the Camera via the Pan &
Tilt Direction Control Panel. 1 is the slowest, 10 is the fastest.
Set Center Mode
Right click on the Live Video Pane and select
area in the center of the Live Video Pane automatically by clicking on the point of interest. In Center Mode>, right click on the Live Video Pane again and select return to control the Camera direction by left clicking and dragging the pointer on the Live Video Pane . Talk Talk function allows the local site talks to the remote site. Please refer to section : Add user > Talk/Listen for further details. This function is only open to “User” who has been granted this privilege by the Administrator. Snapshot Press the button, and the JPEG snapshots will automatically be saved in the appointed place. The default place of saving snapshots is: C:\. To change the storage location, please refer to section for further details. Speaker Press the button to mute/activate the audio. Video Pause / Restart Press the stop button to disable video streaming, the live video will be displayed as black. Press the restart button to show the live video again. Recording Press the button to save video recordings from the Live View to the specified location. Zoom Adjustment Click on the buttons wide/tele to control zoom in/out. Move the cursor closely onto the zoom adjustment bar and click on the desired position to change the room ratio. - 30 -