PLANET ICA-HM620 - Manual (Page 12)

Note
The tiny protrusion on the dome cover must align with one of the four holes on the dome
body.
STEP 4.
Gently pressure the dome cover downward with two hands on the side of it. DO NOT press the cover, as
shown in the figure; this might cause damage to the camera body.
STEP 5.
Use the M3 screw to screw the dome cover and camera body together.
STEP 6.
Make a cable entry hole on the wall to recess the cables. Otherwise, users could push up the Cable
Entry Board on the Compact Pendent Mount’s Mounting Plate to place the cables, as shown in the photo
below.
- 12 -