11 storage management (local recording), Storage management (local recording) – PLANET ICA-HM620 User Manual

Page 66

Pre-trigger buffer recording function allows users to check what happened to cause the trigger. The

pre-trigger buffer time range is from 1 to 3 seconds. Select to set the recording

duration after alarm is triggered. The setting range is from 1 to 99999 seconds. Select

the trigger active> to record the triggered video until the trigger is off.

Note

Please make sure the local recording (with Micro SD/ SDHC card) is activated so that this

function can be implemented. Refer to Recording for further details.

• Send Alarm Message by FTP/E-Mail

The Administrator can select whether to send an alarm message by FTP and/or E-Mail when tampering

is detected.

• Upload Image by FTP

Select this item and the Administrator can assign a FTP site and configure various parameters. When

tampering is detected, event images will be uploaded to the appointed FTP site.

• Upload Image by E-Mail

Select this item and the Administrator can assign an e-mail address and configure various parameters.

When tampering is detected, event images will be sent to the appointed e-mail address.

Note

Make sure SMTP or FTP configuration has been completed. Refer to Mail and FTP for

further details.

• Send HTTP notification

Check this item, select the destination HTTP address, and specify the parameters for HTTP

notifications. When the Tampering Alarm is triggered, the HTTP notifications can be sent to the

specified HTTP server.

For instance, if the custom parameter is set as” action=1&group=2”, and the HTTP server name is”

http://192.168.0.1/admin.php”, the notification will be sent to HTTP server as”

http://192.168.0.1/admin.php? action=1&group=2” when alarm is triggered.

4.3.11 Storage Management (Local Recording)

The Storage Management setting can be found under this path: System> Storage Management.