PLANET WGSW-20160HP - Manual (Page 501)

User’s Manual of WGSW-20160HP/WGSW-24040HP series
501
6.18 UPnP Command
UPnP Configuration
Description:
Show UPnP configuration.
Syntax:
UPnP Configuration
UPnP Mode
Description:
Set or show the UPnP mode.
Syntax:
UPnP Mode [enable|disable]
Parameters:
enable : Enable UPnP
disable: Disable UPnP
(default: Show UPnP mode)
Default Setting:
disable
UPnP TTL
Description:
Set or show the TTL value of the IP header in SSDP messages.
Syntax:
UPnP TTL []
Parameters:
: ttl range (1..255), default: Show UPnP TTL
Default Setting:
4