PLANET WGSW-20160HP - Manual (Page 429)

User’s Manual of WGSW-20160HP/WGSW-24040HP series
429
Security Network NAS Guest_VLAN
Description:
Set or show either global state and parameters (use the global keyword) or per-port state of Guest VLAN.
Unless the 'global' keyword is used, the and parameters will not be unused.
Syntax:
Security Network NAS Guest_VLAN [global|] [enable|disable] [] [] []
Parameters:
global : Select the global Guest VLAN setting
: Select the per-port Guest VLAN setting
(default: Show current per-port Guest VLAN state)
enable|disable : enable : Enable Guest VLAN either globally or on one or more ports
disable: Disable Guest VLAN either globally or on one or more ports
(default: Show current Guest VLAN state)
: Guest VLAN ID used when entering the Guest VLAN. Use the 'global' keyword to change it
(default: Show current Guest VLAN ID)
: The value can only be set if you use the 'global' keyword in the beginning of the command.
The number of times a Request Identity EAPOL frame is sent without response before considering
entering the Guest VLAN
(default: Show current Maximum Reauth Count value
: The value can only be set if you use the 'global' keyword in the beginning of the command.
disable:The Guest VLAN can only be entered if no EAPOL frames have been received on a port for the lifetime of the port
enable :The Guest VLAN can be entered even if an EAPOL frame has been received during the lifetime of the port
(default: Show current setting)
Default Setting:
disable