3 port isolate – PLANET WGSW-20160HP User Manual
Page 136
User’s Manual of WGSW-20160HP/WGSW-24040HP series
136
4.6.10.3 Port Isolate
The diagram shows how the Managed Switch handles isolated and promiscuous ports, and the each PC is not able to access
the isolated port of each other’s PCs. But they all need to access with the same server/AP/Printer. The screen in
Figure 4-6-14
appears. This section will show you how to configure the port for the server – that could be accessed by each isolated port.
Setup steps
1. Assign Port Mode
Set Port-1~Port-4 in Isolate port.
Set Port5 and Port-6 in Promiscuous port. The screen in
Figure 4-6-15
appears.
Figure 4-6-15: The Configuration of Isolated and Promiscuous Port
2. Assign VLAN Member :
VLAN 1 : Port-1,Port-2 ,Port-5 and Port-6
VLAN 2 : Port-3~Port-6. The screen in
Figure 4-6-16
appears.