beautypg.com

PLANET WGSW-20160HP User Manual

Page 208

background image

User’s Manual of WGSW-20160HP/WGSW-24040HP series

208

The Page includes the following fields:

Object

Description

Port Members

Check the checkbox button in case you what to make any port member of the

QCL entry. By default all ports will be checked

Key Parameters

Key configuration are discribed as below:

Tag Value of Tag field can be 'Any', 'Untag' or 'Tag'

VID Valid value of VLAN ID can be any value in the range 1-4095 or 'Any'; user

can enter either a specific value or a range of VIDs

PCP Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or

range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'

DEI Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1

or 'Any'

SMAC Source MAC address: 24 MS bits (OUI) or 'Any'

DMAC Type Destination MAC type: possible values are unicast(UC),

multicast(MC), broadcast(BC) or 'Any'

Frame Type Frame Type can have any of the following values

1. Any

2. Ethernet

3. LLC

4. SNAP

5. IPv4

6. IPv6

Note: all frame types are explained below.

Any

Allow all types of frames.

Ethernet

Ethernet Type Valid ethernet type can have value within 0x600-0xFFFF or 'Any'

but excluding 0x800(IPv4) and 0x86DD(IPv6), default value is 'Any'.

LLC

SSAP Address Valid SSAP(Source Service Access Point) can vary from 0x00 to

0xFF or 'Any', the default value is 'Any'

DSAP Address Valid DSAP(Destination Service Access Point) can vary from

0x00 to 0xFF or 'Any', the default value is 'Any'

Control Address Valid Control Address can vary from 0x00 to 0xFF or 'Any', the

default value is 'Any'

SNAP

PID Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any',

default value is 'Any'

IPv4

Protocol IP protocol number: (0-255, TCP or UDP) or 'Any'

Source IP Specific Source IP address in value/mask format or 'Any'. IP and Mask

are in the format x.y.z.w where x, y, z, and w are decimal numbers between 0 and

255. When Mask is converted to a 32-bit binary string and read from left to right,

all bits following the first zero must also be zero

This manual is related to the following products: