PLANET WGSD-10020 - Manual (Page 362)

User’s Manual of WGSD-10020 Series
PVLAN Lookup []
Parameters:
: Private VLAN ID, default: Show all PVLANs. The allowed range for a Private VLAN ID is the same as the
switch port number range.
Example:
Lookup PVLAN
WGSD-10020HP:/>pvlan lookup
PVLAN ID Ports
-------- -----
1 1-10
PVLAN Isolate
Description:
Set or show the port isolation mode.
Syntax:
PVLAN Isolate [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable port isolation
disable : Disable port isolation
(default: Show port isolation port list)
Default Setting:
disable
Example:
Enable isolate for port10
WGSD-10020HP:/>pvlan isolate 10 enable
362