PLANET WGSD-10020 - Manual (Page 213)

User’s Manual of WGSD-10020 Series
: Click to undo any changes made locally and revert to previously saved values.
: Return to the previous page.
4.10.4 ACL Ports Configuration
Configure the ACL parameters (ACE) of each switch port. These parameters will affect frames received on a port unless the
frame matches a specific ACE.
The ACL Ports Configuration screen in Figure 4-10-4 appears.
Figure 4-10-4 ACL Ports Configuration page screenshot
The page includes the following fields:
Object Description

Port The logical port for the settings contained in the same row.

Policy ID
Select the policy to apply to this port. The allowed values are 1 through 8. The
default value is 1.

Action Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default
value is "Permit".

Rate Limiter ID
Select which rate limiter to apply to this port. The allowed values are Disabled
or the values 1 through 15. The default value is "Disabled".

Port Copy Select which port frames are copied to. The allowed values are Disabled or a
specific port number. The default value is "Disabled".
 Mirror Specify the mirror operation of this port. The allowed values are:
Enabled : Frames received on the port are mirrored.
Disabled : Frames received on the port are not mirrored.
213