Avago Technologies LSI21040 - Manual (Page 43)

3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
Completing the Installation 2-25
2.3 Completing the Installation
Before replacing the cover on your computer, review this installation
procedure check list. This can save you effort later.
Step 1. Replace the cabinet cover on your computer.
Step 2. Plug in all power cords.
Step 3. Switch power on to all devices and your computer.
Step 4. Wait for your computer to boot up.
Step 5. To change the configuration of the host adapter, refer to
Chapter 2 “SCSI BIOS” of the PCI Storage Device
Management System SDMS 4.0 User’s Guide.
Use this guide for LSI Logic software and driver information for
various operating systems (or the user’s guide for
non-LSI Logic software you will be using).
Step 6. Load the software and drivers suitable to your application and
system.
Verify Installation Procedures Done
Host adapter connection in PCI bus slot secure
Internal SCSI bus connections secure (pin-1 continuity)
External SCSI bus connections secure
Proper SCSI bus termination established
Unique SCSI IDs set and recorded for each device