Avago Technologies LSI21040 - Manual (Page 32)

3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
2-14 Installing the LSI21040
2.2.5 Making External SCSI Bus Connections
This section provides step-by-step instructions about making external
SCSI bus connections. To connect external SCSI devices to the
LSI21040, follow these steps:
Step 1. Plug the 68-pin HD connector on one end of a shielded external
SCSI cable into the host adapter connector J3. (
Figure 2.3
provides examples of SCSI cables to use.)
This connector is in the bracket attached to the back panel of
your computer.
Figure 2.9 shows how this connection is made.
Figure 2.9 External Cable to Host Adapter