4 making internal scsi bus connections, Making internal scsi bus connections – Avago Technologies LSI21040 User Manual

Page 27

3.75 pc

10.25 pc

11.25 pc

38.25 pc

4.333 pc

48.583 pc

52.5 pc

34.5 pc

44.25 pc

Detailed Installation Procedure

2-9

2.2.4 Making Internal SCSI Bus Connections

This section provides step-by-step instructions about making internal
SCSI bus connections.

Step 1.

Plug one end of the 68-pin internal SCSI ribbon cable into
connector J4 or J2.

illustrates an example for this

step.

Important:

You must match pin 1 on this and all subsequent
connections.

Figure 2.4

Internal SCSI Ribbon Cable to Host Adapter
Connection