Avago Technologies LSI21040 - Manual (Page 33)

3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
Detailed Installation Procedure 2-15
Step 2. Plug the 68-pin connector on the other end of the shielded
external SCSI cable into the SCSI connector on your external
SCSI device.
Figure 2.10 illustrates an example of this
connection.
Figure 2.10 External SCSI Device Cable
If this is the only external SCSI device on your system, proceed to
Section 2.2.6, “SCSI Bus Termination,” on page 2-17 for termination
instructions. If you have multiple SCSI devices, proceed to the next page.