Avago Technologies LSI21040 - Manual (Page 29)

3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
Detailed Installation Procedure 2-11
If you have more than one internal device to connect, use an internal
SCSI ribbon cable with the required number of connectors attached
along its length and proceed to the next step.
Figure 2.6 illustrates this
type of a connection. If you have only one internal device, proceed to
Step 4 on
page 2-13.
Step 3. Plug the cable into each additional device as needed.
Figure 2.7 provides an example of this type of chained
connection. Make sure to match pin 1 on all connections.
Figure 2.6 Connecting Additional Internal SCSI Devices