Avago Technologies MegaRAID SAS 8204ELP User Manual

Page 46

3-2

MegaRAID SAS RAID Controller Characteristics

Note:

The only difference between the SAS 8704ELP RAID
controller and the SAS 8708ELP RAID controller is that the
SAS 8704ELP does not contain the J9 connector, which
supports ports 4–7.

This subsection provides the board layout, and connector and jumper
information for the SAS RAID controller.

Figure 3.1

shows the jumpers

and connectors on the SAS 8708ELP RAID controller, and

Table 3.1

describes them.

Figure 3.1

Card Layout for the MegaRAID SAS 8708ELP RAID
Controller

This manual is related to the following products:

MegaRAID SAS 8204ELP (Channel) MegaRAID SAS 8204XLP MegaRAID SAS 8204XLP (Channel) MegaRAID SAS 8208ELP MegaRAID SAS 8208ELP (Channel) MegaRAID SAS 8208XLP MegaRAID SAS 8208XLP (Channel) MegaRAID SAS 8300XLP MegaRAID SAS 8308ELP MegaRAID SAS 8344ELP MegaRAID SAS 84016E MegaRAID SAS 84016E (Channel) MegaRAID SAS 8408E MegaRAID SAS 8480E MegaRAID SAS 8704ELP MegaRAID SAS 8704ELP (Channel) MegaRAID SAS 8704EM2 MegaRAID SAS 8704EM2 (Channel) MegaRAID SAS 8708ELP MegaRAID SAS 8708ELP (Channel) MegaRAID SAS 8708EM2 MegaRAID SAS 8708EM2 (Channel) MegaRAID SAS 8880EM2 MegaRAID SAS 8880EM2 (Channel) MegaRAID SAS 8888ELP MegaRAID SAS 8888ELP (Channel) MegaRAID SAS 0260CV-4i MegaRAID SAS 0260CV-8i