Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 24)

Page 24 LSI Corporation | January 2011
MegaRAID SAS Device Driver Installation User Guide Chapter 8: Solaris 10 x86 and Solaris Express x86 Driver Installation | Updating the Driver on
a Solaris 10 x86 or a Solaris Express x86
The following information applies to the MegaRAID Entry SAS RAID controllers:
 Reboot the system after patch installation.
 Before you install this patch, un-install the previously installed driver. The previous
driver was installed either through the package mrentrysas.
On the Solaris system, if you have a Gen1-MR controller, a Gen2-MR controller, and a
MegaRAID Entry controller, all the drivers are installed and they work in parallel.
Table 4: Solaris Driver Names and Descriptions
Driver Name Description
Available as Part of the
Operating System CD
Package Name on LSI
Web Site
mega_sas Driver For Gen1
MegaRAID controllers:
82XX, 83XX, and 84XX
SAS RAID controllers
Yes.
The Package name is
SUNWmegasas.
Yes.
The package name is
megasas.
mr_sas Driver For Gen2
MegaRAID controllers:
87XX, 88XX, 96XX, and
98XX SAS RAID
controllers
MR controllers
Yes.
The Package name is
SUNWmrsas.
Yes.
The package name is
mrsas.
mrentry_sas Driver For MegaRAID
Entry controllers No. Yes.
The package name is
mrentrysas.