Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 18)

Page 18 LSI Corporation | January 2011
MegaRAID SAS Device Driver Installation User Guide Chapter 6: SCO OpenServer 6 and SCO UnixWare 7 Driver Installation | Upgrading the Driver on an Existing
OpenServer 6 or UnixWare 7 System
3. Make a megasas HBA CD from the ISO file:
# cdrecord -v -dev=c,b,t -dao -driveropts=burnfree
-speed=99 megasas_sco.iso
where c,b,t is taken from the output of the cdrecord --scanbus commmand.
4. Use the megasas HBA CD during system installation.
6.2 Upgrading the Driver on
an Existing OpenServer 6 or
UnixWare 7 System
The following procedure updates the megasas device driver in an existing SCO
OpenServer or SCO UnixWare system. You can use the megasas HBA diskette to
upgrade the megasas driver on your system by using the following step.
1. Insert the HBA driver diskette, and type the following command:
# pkgadd -d diskette1 all
or
# pkgadd -d diskette1 megasas
You can use the megasas HBA CD to upgrade the megasas driver on your system
using the following step.
2. Insert the HBA driver CD, and type the following command:
# pkgadd -d cdrom1 all
or
# pkgadd -d cdrom1 megasas