Kyocera Taskalfa 3511i User Manual
Page 99
2-34
Installing and Setting up the Machine > Network Setup
6
Configure the settings.
1
[Do not use automatic configuration] > [Next] > [Next]
2
[Use LAN cable] > [Next] > [Next]
3
[Easy setup] > [Next]
The machine is detected.
4
Select the machine > [Next]
5
Select [Use the device settings.] on [Authentication mode], and enter the login user
name and password. Login user name and Password are both Admin.
6
Configure the communication settings > [Next]
7
Change the settings of access point as necessary > [Next]
The network is configured.
Wireless LAN Connection by Using Wi-Fi Direct
1
Display the screen.
[System Menu/Counter] key > [System/Network] > "Network" [Next] > "Wi-Fi Direct
Settings" [Next] > "Wi-Fi Direct" [Change]
2
Configure the settings.
[On] > [OK]
3
Restart the network.
[System Menu/Counter] key > [System/Network] > "Network" [Next] > "Restart Network"
[Start] > [Yes]
4
Connect a computer or a handheld device with the machine.
5
Insert the DVD.
NOTE
• Only one machine can be searched using Wi-Fi Setup Tool. It may take times to search
the machine.
• If the machine is not detected, select [Advanced setup] > [Next]. Select [Express] or
[Custom] as device discovery method and specify the IP address or host name to
search the machine.