Kyocera Taskalfa 3511i - Manual (Page 401)

8-47
Setup and Registration (System Menu) > System Menu
System/Network
Configures machine system settings.
Network
Configures network settings.
Host Name
[System Menu/Counter] key > [System/Network] > [Network] > [Host Name]
Wired Network Settings
[System Menu/Counter] key > [System/Network] > [Network] > [Wired Network Settings]
Configure wired network settings.
TCP/IP Setting
Item Description
Host Name Check the host name of the machine. Host name can be changed from Command
Center RX.
Changing Device Information (page 2-64)
Item Description
TCP/IP Select whether to use TCP/IP Protocol.
Value : Off, On
IPv4 Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/
IP] is set to [On].
IP Address Set the IP address.
Value : ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be
entered.
Subnet Mask Set the IP subnet mask.
Value : ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be
entered.
Default Gateway Set the IP gateway address.
Value : ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be
entered.
DHCP Select whether to use the DHCP (IPv4) server.
Value : Off, On
Auto-IP Select whether to use Auto-IP.
Value : Off, On