Kyocera Taskalfa 3511i - Manual (Page 473)

9-45
User Authentication and Accounting (User Login, Job Accounting) > Configuring Job Accounting
Count by Paper Size
This counts the number of pages by paper size (e.g. Letter).
In addition to paper size, media type can also be specified (e.g. count the letter-size color paper used). If you do not
specify the media type, the number of used sheets will be counted for the specified sheet size, regardless of the media
type.
1 Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting] > "Job Accounting
Settings" [Next]
2 "Job Accounting (Local)" [Next] > "Default Setting" [Next] > "Count by Paper Size" [Next] >
"Paper Size 1 (to 5)" [Change]
2 Configure the settings.
1 Select [On].
2 Select the paper size.
3 Select [Media Type] to specify media type.
4 Select the media type and select [OK].
5 Select [OK].
[Total] selected for Copy/Printer Count
Print Restriction
(Total) Sets the default restriction on the total number of sheets
used for copying and printing.
Scan Restriction
(Others) Sets the default restriction on the number of sheets used for
scanning (excludes copying).
FAX TX Restriction
*1
Sets the default restriction on the number of sheets used for
sending faxes.
*1 Displayed only when the optional FAX Kit is installed.
NOTE
Paper size is available in five types, 1 to 5. These types are specified in accounting reports.
Print Accounting Report (page 9-48)
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Item Description
Model Name Login User Name Login Password
TASKalfa 3011i 3000 3000
TASKalfa 3511i 3500 3500