Kyocera Taskalfa 3511i - Manual (Page 289)

6-25
Using Various Functions > Functions
Staple/Punch
Staple
Staples the finished documents. The staple position can be selected.
Original Orientation and Staple Position
NOTE
This function requires the optional Document Finisher.
For details on paper sizes and numbers of sheets that can be stapled, refer to the following:
1,000-Sheet Finisher (page 11-24)
3,000-Sheet Finisher (page 11-25)
Item Value Description
Staple Off
Top Left Select the staple position. For details on original
orientation and staple position, refer to the following:
Original Orientation and Punch Hole Position (page
6-27)
Top Right
2 staples Left
2 staples Top
2 staples Right
Original
Orientation Top Edge on Top, Top Edge on Left,
Auto
*1
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
Select the orientation of the original document top edge
to scan correct direction. Select [Original Orientation]
to choose orientation of the originals, either [Top Edge
on Top] or [Top Edge on Left]. Then select [OK].
Original orientation Paper orientation Top Edge on Left
Paper orientation
Cassette paper load
direction
Cassette paper load
direction
Copy
Org./Paper/
Finishing
Custom
Box
Functions USB
Memory
Functions