beautypg.com

Obtain nw user property, Obtain nw user property -25 – Kyocera Taskalfa 3511i User Manual

Page 453

background image

9-25

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Obtain NW User Property

Set the required information to obtain the network user property from the LDAP server. The user name and E-mail
address obtained with this setting is shown in the user information, the status confirmation screen, and the header of
E-mail.

1

Display the screen.

1

[System Menu/Counter] key > [User Login/Job Accounting]

2

[User Login Setting] > [Obtain NW User Property] > [On]

2

Configure the settings.

[On] > Add information on each item > [OK]

NOTE

To obtain the network user property from the LDAP server, [Network Authentication] must be selected for the
authentication method in "Enabling User Login Administration". Select "On" for "LDAP" in "Protocol Detail".

Enabling User Login Administration (page 9-3)
Protocol Settings (page 8-54)

NOTE

If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.

Item

Descriptions

Server Name

*1

Enter the LDAP server name or the IP address (up to 64
characters). If a server name is not entered, user information will
be acquired from the server set for Network Authentication.

Port

Port number for LDAP server. The default port number is 389.

Name 1

*2

Enter the LDAP Attribute to obtain the user name to be displayed
from the LDAP server (up to 32 characters).

Name 2

*3

Enter the LDAP Attribute to obtain the user name to be displayed
from the LDAP server (up to 32 characters).

E-mail Address

*4

Enter the LDAP Attribute to obtain the E-mail address from the
LDAP server (up to 32 characters).

Authentic at Type

*5

Set the authentication method. Select [Simple] or [SASL]. After
changing the setting, restart the system or turn the power off and
then on.

Model Name

Login User Name

Login Password

TASKalfa 3011i

3000

3000

TASKalfa 3511i

3500

3500

This manual is related to the following products: