Kyocera Taskalfa 3511i - Manual (Page 478)

9-50
User Authentication and Accounting (User Login, Job Accounting) > Apply Limit
Apply Limit
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
1 Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting] > "Job Accounting
Settings" [Next]
2 Select "Apply Limit" [Change].
2 Configure the settings.
Select [Immediately], [Subsequently], or [Alert Only] > [OK]
Item Descriptions
Immediately *1
*1 The next job will be prohibited in sending or in storing in the box.
Job stops when the counter reaches its limit.
Subsequently Printing/scanning of the job continues but the subsequent job will
be rejected.
Alert Only Job continues while displaying an alert message.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Model Name Login User Name Login Password
TASKalfa 3011i 3000 3000
TASKalfa 3511i 3500 3500