TA Triumph-Adler DCC 2526 - Manual (Page 79)

Section 6 OTHER CONVENIENT FUNCTIONS
6-31
7
Select “Saddle stitch” or “Bind & Fold”.
Inch specifications
Metric specifications
NOTE
“Bind & Fold” is displayed only when the optional Folder
Unit is installed.
8
If “It is impossible to copy in present setting mode. Change
setting of original and finishing mode.” appears, check (on
the right side of the touch panel) whether both the
orientation of the originals and the finish mode setting are
correct or not.
Inch specifications
Metric specifications
9
If you want to add covers, press the “Stitching Front cvr”
[“Stitching Front cov.”] key and go to the next step.
If you do NOT want to add covers, go directly to step 11.
Inch specifications
Metric specifications
10
Press the “Cover” key and select whether or not (and
where) to copy on each of the front and back covers.
Inch specifications
Metric specifications
11
Press the [Start] key.
Scanning of the originals will start.
If you set the originals in the optional Document Processor,
copying will start automatically.
If you set an original on the platen, a message will be
displayed telling you to set the next original. In this case,
go to the next step.
Ready to copy.(Full-color) Paper Size Set
Back Close Saddle Stitch
None
Saddle
stitch
Bind &
Fold
When selecting [Saddle Stitich],
staple is possible for finishing.
When selecting [Bind & Fold],
Staple & folding is possible.
11x8 1 / 2 ”
Saddle
stitch
Bind
& Fold
Ready to copy.(Full Col.) Paper Size Set
Back Close Saddle Stitch
None When selecting [Saddle Stitich],
staple is possible for finishing.
When selecting [Bind & Fold],
Staple & folding is possible.
It is impossible to copy in present setting mode.
Change setting of original and finishing mode. Paper Size Set
Back Register Close Booklet
None
Booklet
Book
Booklet
1 sided
2-sided
Left/Right
2-sided
Top/Bottom
Open from
left
Stitching
Front cvr
Open from
right
Open from
top
Original Finished Stitching
Off
Rear
Left top
corner
Check direction
Check direction of
original top side.
11x8 1 /
2
Saddle
Stitch
None
Paper Size Set
Back Register Close Booklet
Stitching
Front cov.
Original Finished Stitching
Off
Back Edge
Left top
corner
Check direction
Check direction of
original.
None
Booklet
Book
Booklet
1-sided
2-sided
Left/Right
2-sided
Top/Bottom
Left
binding
Right
binding
Top
binding
It is impossible to copy in present setting mode.
Change setting of original and finishing mode.
Center
Staple
None
Booklet
None
Booklet
Book
Booklet
1 sided
2-sided
Left/Right
2-sided
Top/Bottom
Open from
left
Stitching
Front cvr
Open from
right
Open from
top
2 sided mode.(Full-color) Paper Size Set
Back Register Close
Original Finished Stitching
Off
None
Rear Left top
corner
Check direction
Check direction of
original top side.
11x8 1 / 2
Saddle
Stitch
Booklet
None
Booklet
Book
Booklet
1-sided
2-sided
Left/Right
2-sided
Top/Bottom
Left
binding
Stitching
Front cov.
Right
binding
Top
binding
Duplex Mode.(Full Col.) Paper Size Set
Back Register Close
Original Finished Stitching
Off
Back Edge
Left top
corner
Check direction
Check direction of
original.
Center
Staple
None
Stitching Front cvr
No cover
Cover
2 sided mode.(Full-color) Paper Size Set
Back Close
Blank
Front copy
Back copy
2 sided
copy
Front cover
Blank
Front copy
Back copy
2 sided
copy
Rear cover
11x8 1 / 2
Stitch. front cover
No cover
Cover
Duplex Mode.(Full Col.) Paper Size Set
Back Close
Blank
Front copy
Back copy
2-sided
Copy
Front cover
Blank
Front copy
Back copy
2-sided
Copy
Rear cover