TA Triumph-Adler DCC 2526 - Manual (Page 171)

Section 7 COPIER MANAGEMENT
7-35
Scanner function management ON/OFF
Perform the following procedure when you want to turn copy
management ON or OFF for the scanner functions of this machine.
NOTE
This setting is only available when the optional Network
Scanner Kit is installed in your copier.
1
Select “Scanner Managem.” under the “Setting item”
column on the left side of the touch panel and then press
the “Change #” key.
The “Scanner Managem.” screen will be displayed.
Inch specifications
Metric specifications
2
To turn copy management ON for the scanner functions of
this machine, press the “On” key.
Inch specifications
Metric specifications
NOTE
If you want to quit the displayed setting without changing
it, press the “Back” key. The touch panel will return to the
screen in step 1.
3
Press the “Close” key.
The touch panel will return to the screen in step 1.
Close
Change #
Value Setting item
Default setting - Management
Copy management
Print. Managem.
Printer error report
Others Mgt. Reg. (print)
Copy/Printer output mgt.
Scanner Management
Fax Management
Management Def. setting
On
On
On
On
All
On
On
Close
Change #
Value Setting item
Default setting - Management
Copy management
Print. managem.
Printer error report
Others mgt. Reg. (print)
Copy/Printer output mgt.
Scanner Management
Fax Management
Management Def. setting
On
On
On
On
All
On
On
Close Back
Default setting - Management - Management Def. setting
Scanner Management
Scanner management can be set up.
Off
On
Close Back
Default setting - Management - Management Def. setting
Scanner Management
Scanner management can be set up.
Off
On