TA Triumph-Adler LP 210 - Manual (Page 23)

Unpacking, installing and setting up the printer 2
Laser Printer 200 Series 2-7
2.3 Installing your laser printer
Place of installation
The printer should be set up in a place which is:
G dry and free from dust,
G on a stable surface,
G well ventilated,
G well clear of highly flammable items, e.g. curtains,
G clear of objects which might obstruct the printer’s ventilation slits,
G near to an easily accessible power socket.
The printer must be positioned such that it cannot be adversely affected
by the following:
G splashing liquids,
G organic gases, e.g. ammonia,
G direct sunlight,
G severe temperature fluctuations,
G exhaust-air from heating, ventilation or air-conditioning systems.
Storage of consumables and accessories
Printing consumables and accessories should be kept:
G sealed in their original packagings,
G protected against direct sunlight or heat,
G protected against fluorescent light,
G in a cool, dry and dust-free place,
G out of reach of children.
CAUTION
Toner poses a health hazard!
Toner is harmful if swallowed.
➜ If you swallow toner, consult a doctor immediately.
➜ If you get toner on your hands, wash them immediately with cold water
and soap.