HP LaserJet Ultra M106w - Manual (Page 74)

Network-connected printers
a. Print a configuration page to determine the IP address or host name.
i.
Press and hold the Resume/Cancel button until the Ready light begins blinking.
ii.
Release the Resume/Cancel button.
b. Open a web browser, and in the address line, type the IP address or host name exactly as it
displays on the printer configuration page. Press the Enter key on the computer keyboard. The
EWS opens.
NOTE: If the web browser displays a message indicating that accessing the website might not be
safe, select the option to continue to the website. Accessing this website will not harm the
computer.
2. Click the System tab, and then select the Energy Settings page.
3. From the Sleep/Auto Off After Inactivity drop-down, select the time for the delay.
4. Click the Apply button.
Set the Shut Down After Inactivity delay and configure the printer to use 1 watt or
less of power
Use the EWS to set the amount of time before the printer shuts down.
NOTE: After the printer shuts down, the power consumption is 1 watt or less.
Complete the following procedure to change the Shut Down After Delay setting:
1. Open the HP Embedded Web Server (EWS):
Direct-connected printers
a. Open the HP Printer Assistant.
● Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select
the printer name.
● Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and
then select the printer name.
● Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select
All Programs, click HP, click the folder for the printer, select the icon with the printer's name,
and then open HP Printer Assistant.
b. In the HP Printer Assistant, select Print, and then select HP Device Toolbox.
Network-connected printers
a. Print a configuration page to determine the IP address or host name.
64 Chapter 5 Manage the printer ENWW