MCZ Vivo 80 Pellet HYDRO - Manual (Page 21)

19
3-DRAWINGS AND TECHNICAL FEATURES
Technical Dept. - All rights reserved - Reproduction is prohibited
TECHNICAL CHARACTERISTICS VIVO 80 PELLET HYDRO
Nominal output power
16,9 kW (14534 kcal/h)
Nominal output power (H
2
O)
14,2 kw (12212 kcal/h)
Minimum output power
4,9 kW (4214 kcal/h)
Minimum output power (H
2
O)
3,5 kw (3010 kcal/h)
Efficiency at Max 90,1%
Efficiency at Min 95,2%
Temperature of exhaust smoke at Max 150°C
Temperature of exhaust smoke at Min 65°C
Particulate/OGC / Nox (13%O
2
) 20 mg/Nm 3 - 1 mg/Nm 3 - 117 mg/Nm 3
CO at 13% O
2
at Min and at Max 0,028 – 0,012%
CO
2
at Min and at Max 6,4 - 9,8%
Recommended draught at Max power***
0,10 mbar - 10 Pa***
Recommended draught at Min power
0,02 mbar - 2 Pa
Maximum operating pressure 2,5 bar - 250 kPa
Mass of smoke 12.5 g/sec
Hopper capacity 20+15 litres
Type of pellet fuel Pellet diameter 6-8 mm and size 3-40 mm
Pellet hourly consumption Min ~ 1 kg/h* - Max ~ 3,6 kg/h*
Autonomy At min ~ 23 h* - At max ~ 7 h*
Heatable volume m 3 363/40 – 415/35 – 484/30 **
Combustion air inlet External diameter 50 mm
Smoke outlet External diameter 80 mm
Air inlet 80 cm 2
Nominal electrical power (EN 60335-1) 80 W (Max 420 W)
Supply voltage and frequency 230 Volt / 50 Hz
Net weight 160 kg
Weight with packaging 170 kg
Distance from flammable material (back) 100 mm
Distance from flammable material (side) 100 mm
* Data that may vary depending on the type of pellets used
** Volume that can be heated, according to the power requirement per m 3 (respectively 40-35-30 Kcal/h per m 3 )
***Value recommended by the manufacturer (non-binding) for optimal product operation
Tested according to EN 14785 in accordance with European regulation for Construction Products (UE 305/2011)