MCZ Ego AIR - Manual (Page 19)

PELLET STOVES Chapter 3
INSTALLATION AND USE MANUAL page 19
Installation and fitting Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
J
J
Position the stove without its cladding and connect it to the flue pipe.
Use the four adjustable feet (J) to get the stove correctly levelled so
that the smoke outlet (S) is lined up with the connecting pipe (H) .
Once the operations for connection are complete, assemble the
cladding (ceramics or steel sides).
If the stove needs to be connected to a discharge pipe which goes
through the rear wall (to connect up with the flue), take the greatest
care to make sure that the joint is not stressed.
If the smoke outlet of the stove is forced or used
improperly to lift it or position it, the operation of the
stove can be damaged irreparably.
S
H
1. Turn the feet clockwise to
lower the stove
2. Turn the feet counter-
clockwise to lower the stove