beautypg.com

Technical characteristics – MCZ Ego AIR User Manual

Page 17

background image

PELLET STOVES

Chapter 3

INSTALLATION AND USE MANUAL

page

17

Installation and fitting

Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited

3.1.3. Technical characteristics


Technical characteristics

Star – Ego Air

Star – Ego Comfort Air

Nominal output power

8 kw / 6880 kcal/h

8 kw / 6880 kcal/h

Minimum output power

2.4 kw / 2064 kcal/h

2.4 kw / 2064 kcal/h

Yield at maximum

91,7 %

91,7 %

Yield at minimum

94,1 %

94,1 %

Temperature of exhaust smoke at maximum

170°C

170°C

Temperature of exhaust smoke at minimum

100°C

100°C

Particulate /OGC / Nox (13%O

2

)

22 mg/Nm3 - 5 mg/Nm3 - 123

mg/Nm3

22 mg/Nm3 - 6 mg/Nm3 - 121

mg/Nm3

CO at 13%O

²

at minimum and maximum

0.025 — 0.014%

0.025 — 0.014%

CO

2

at minimum and maximum

5.7% – 8.7%

5.7% – 8.7%

Smoke mass

6.6 g/sec

6.6 g/sec

Minimum draught at maximum power

0.10 mbar – 10 Pa

0.10 mbar – 10 Pa

Minimum draught at minimum power

0.05 mbar – 5 Pa

0.05 mbar – 5 Pa

Hopper capacity

35 litres

35 litres

Fuel pellet type

Pellet diameter 6-8 mm. Length

range 5-30 mm

Pellet diameter 6-8 mm. Length

range 5-30 mm

Pellet consumption per hour

Min ~ 0.6 kg/h * Max. ~ 1.8

kg/h *

Min ~ 0.6 kg/h * Max. ~ 1.8

kg/h *

Operating time between re-fuelling

At min~ 40 h * At max. ~ 13

h *

At min~ 40 h * At max. ~

13 h *

Heatable volume m

3

172/40 – 196/35 – 229/30 **

172/40 – 196/35 – 229/30 **

Combustion air inlet

External diameter 50 mm.

External diameter 50 mm.

Smoke outlet

External diameter 80 mm.

External diameter 80 mm.

Rated electrical power (EN 60335-1)

Max. 420 WMed. 80 W

Max. 420 WMed. 80 W

Power supply frequency and voltage

230 Volts / 50 Hz

230 Volts / 50 Hz

Net weight

140 kg

140 kg

Weight with packaging

150 Kg

150 Kg

Distance from combustible material (rear)

50 mm

200 mm

Distance from combustible material (sides)

100 mm

200 mm

* Data that may vary depending on the type of pellets used

** Volume that can be heated, according to the power requirement per m

3

(respectively 40-35-30 Kcal/h per m

3

)

Install in accordance with the applicable regulations in force.

Head according to EN 14785 in agreement with the EU Building Products Regulation (EU 305/2011).


This manual is related to the following products: