Epson AcuLaser C9300 - Manual (Page 96)

There is insufficient memory to print the page at the specified print quality. The printer automatically
lowers the print quality so that it can continue printing. If the quality of the printout is not acceptable,
try simplifying the page by limiting the number of graphics or reducing the number and size of fonts.
To clear this error, select Clear Warning from the control panel’s Reset Menu. See “How to access
the control panel menus” on page 60 for instructions.
You may need to increase the amount of printer memory to be able to print at the desired print quality
for your document. For more information on adding memory, see “Memory Module” on
page 124.
Install Cassette1/Install Cassette2/Install Cassette3
The lower paper cassette is not installed. Install the indicated cassette.
Install Fuser
The fuser unit is not installed correctly. Consult your dealer.
Install Photocon uuuu
The wrong photoconductor unit is installed in the indicated color position in the printer or the
position is empty. (The letters C, M, Y, or K appear in place of uuuu and indicate the colors Cyan,
Magenta, Yellow, and Black respectively.)
Install the indicated cartridges. See “Replacing Consumable Products” on page 133.
Install uuuu Toner Cartridge
The wrong toner cartridge is installed in the indicated color toner cartridge position in the printer or
the position is empty. (The letters C, M, Y, or K appear in place of uuuu and indicate the colors Cyan,
Magenta, Yellow, and Black respectively.)
Install the indicated cartridges. See “Replacing Consumable Products” on page 133.
Invalid AUX I/F Card
This message means that the printer cannot communicate with the installed optional interface card.
Turn off the printer, remove the card, then reinstall it.
Invalid Data
The spool file on the driver is deleted while printing or the data is abnormal. Press the Start/Stop
button to clear the error.
Epson AcuLaser C9300 Series User's Guide
Using the Control Panel 96