Epson AcuLaser C9300 - Manual (Page 184)

Computer system requirements
Windows
Recommended
OS Windows 7, 7 x64, Vista, Vista x64, XP, XP x64, Server 2008, Server 2008 x64, Server 2003, or Server
2003 x64
Remarks No restrictions for these systems
Mac OS X
Recommended
OS Version Mac OS X 10.4.11 or later
Computer Power Mac G3, G4, G5, iMac, eMac, PowerBook G3, G4, or iBook
Note:
To use binary data, Epson recommends that you use AppleTalk for the printer’s network connection. If
you use a protocol other than AppleTalk for the network connection, you need to set Binary to On in the
PS3 Menu
on the control panel. For details about the settings, see the Network Guide. If you use the
printer with a local connection, you cannot use binary data.
Using the PostScript printer driver with Windows
To print in the PostScript mode, you will have to install the printer driver. See the appropriate sections
below for installation instructions according to the interface that you are using to print.
Installing the PostScript printer driver for the USB interface or the parallel interface
c
Caution:
Never use EPSON Status Monitor and PostScript 3 driver at the same time when the printer is
connected via a USB port. It may damage the system.
Note:
❏ Installing the printer software for Windows may require administrator privileges. If you have
problems, ask your administrator for more information.
❏ Turn off all virus protection programs before installing the printer software.
1. Make sure that the printer is turned off. Insert the printer Software Disc into your CD/DVD drive.
Epson AcuLaser C9300 Series User's Guide
About the Printer Software 184