Epson AcuLaser C9300 - Manual (Page 88)

Changes the restriction range. When Interface is selected, the password is required to change the
settings in the USB and Network menus. When Config is selected, the password is required to enter
Quick Print JobMenu
or ConfidentialJobMenu, or to change the settings in all menus. When
All is selected, the password is required to enter Quick Print JobMenu or
ConfidentialJobMenu , or to change the settings and to perform the items in all menus. Before
changing the setting, you have to enter the password set in the Password Config setting.
Energy Saver Menu
Item Settings (default in bold)
Preheat Mode Off, On
Time to Preheat 1Min, 3Min, 5Min, 15Min, 30Min, 60Min
Time to Sleep 1Min, 3Min, 5Min, 15Min, 30Min, 60Min
Deep Sleep Mode *1 *2 On, Off
Power Off Timer *3 On, Off
Time to Off *1 30, 60, 120, 180, 240, 360, 480Min
Timer Setting Off, On
Start *4 0:00...8:00...23:59
Stop *4 0:00...18:00...23:59
Day *4 Cancel Selection, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday,
Sunday
*1 Not available in PS3.
*2 Not available when a USB cable is connected or an optional interface card is installed.
*3 If EU is not selected as the Region Setting for the initial settings, the default value is Off.
*4 Available only when Timer Setting is set to On.
Preheat Mode
When this setting is set to On, the printer enters the preheat mode and reduces power consumption. In
this mode, the printer returns to the ready status faster than from sleep mode or deep sleep mode, but
uses more power.
Time to Preheat
Epson AcuLaser C9300 Series User's Guide
Using the Control Panel 88