Epson AcuLaser C9300 - Manual (Page 75)

Specifies the current date and time by entering the time difference from Greenwich Mean time.
Time Setting
Specifies the current date and time by entering them directly.
Date Format
Specifies the format to display the date.
Parallel Menu
These settings control communication between the printer and the computer when using the parallel
interface.
Item Settings (default in bold)
Parallel I/F * On, Off
Speed * Fast, Normal
Bi-D * ECP, Off, Nibble
Buffer Size * Normal, Maximum, Minimum
* After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again. While it is
reflected in the Status Sheet and EJL read-back, the actual change takes effect after a warm boot or after the power is
turned on again.
Parallel I/F
Allows you to activate or deactivate the parallel interface.
Speed
Specifies the pulse width of the ACKNLG signal when receiving data in the Compatibility mode or
Nibble mode. When Fast is selected, the pulse width is about 1 μs. When Normal is selected, the pulse
width is about 10 μs.
Bi-D
Allows you to specify the bidirectional communication mode. When you select Off, bidirectional
communication is disabled.
Epson AcuLaser C9300 Series User's Guide
Using the Control Panel 75