Epson AcuLaser C9300 - Manual (Page 129)

3. Slide and push the interface card into the slot firmly, then fasten the screw as shown below.
4. Reconnect the interface cable and power cord and turn the printer on.
To confirm that the option is installed correctly, print a Status Sheet. See “Printing a Configuration
Status Sheet” on page 154.
Removing an interface card
c
Caution:
Before you remove an interface card, be sure to discharge any static electricity by touching a
grounded piece of metal. Otherwise, you may damage static-sensitive components.
Perform the installation procedure in reverse.
CompactFlash Memory
Installing a CompactFlash memory
An optional CompactFlash memory enables you to store overlay forms, use Reserve Job function, and
improve the collate printing environment.
w
Warning:
Be careful when working inside the printer as some components are sharp and may cause injury.
c
Caution:
Before you install a CompactFlash memory, be sure to discharge any static electricity by touching a
grounded piece of metal. Otherwise, you may damage static-sensitive components.
Epson AcuLaser C9300 Series User's Guide
Installing Options 129