Epson AcuLaser C9300 - Manual (Page 128)

When removing the memory module from its slot, spread apart the clips on each side of the memory
slot, and then slide the memory module out.
Interface Card
Your printer comes with an empty type-B interface slot. Various optional interface cards are available
to expand your printer’s interface options.
Installing an interface card
c
Caution:
Before you install the interface card, be sure to discharge any static electricity by touching a
grounded piece of metal. Otherwise, you may damage static-sensitive components.
1. Turn the printer off and unplug the power cord and interface cable.
2. Remove the screws and the Type-B interface card slot cover as shown below.
w
Warning:
Removing screws and covers that are not described in the following instructions will expose
high voltage areas.
Note:
Keep the slot cover in a safe place. You will need to reattach it if you remove the interface card later.
Epson AcuLaser C9300 Series User's Guide
Installing Options 128