Epson AcuLaser C9300 - Manual (Page 70)

Setup Menu
Item Settings (default in bold)
Language English, Français, Deutsch, Italiano, ESPAÑOL, SVENSKA, Dansk, Nederlands, SUOMI,
Português, Norsk,
, , Türkçe, , ,
Time Out 0, 5 to 60 to 300 in increments of 1
MP Mode Normal, Last
Manual Feed Off, 1st Page, EachPage
Copies 1 to 999
Duplex *1 *2 Off, On
Binding *1 *2 Long Edge, Short Edge
Start Page *1 *2 Front, Back
Skip Blank Page *3 Off, On
Auto Eject Page *4 Off, On
Size Ignore Off, On
Auto Cont Off, On
Page Protect *3 Auto, On
A4/LT Auto Switching On, Off
Convert to Monochrome On, Off
LCD Contrast 0 to 7 to 15
RAM Disk *1 *5 Off, Normal, Maximum
Confirm Media Type No, Yes
Job Info. Display Pattern 1, Display Pattern 2, Off
*1 Available only when the corresponding option is installed.
*2 Available only when you use A4, A3, A5, B4, B5, LT, LGL, GLG, B, or EXE size paper.
*3 Available only for ESC/Page, ESC/P2, FX, or I239X mode.
*4 Not available in PS3 and PCL.
*5 After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again.
Language
Epson AcuLaser C9300 Series User's Guide
Using the Control Panel 70