Epson 4500 - Manual (Page 269)

Commands Arranged by Topic
ESC b
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Set Vertical Tabs in Channels
ESC b c n1 n2 . . . 0
27 98 c n1 n2 . . . 0
1B 62 c n1 n2 . . . 00
Functions the same as ESC B, except that the variable c selects a
channel for the vertical tabs, which must be from 0 to 7. Therefore,
up to eight sets of vertical tabs can be set. The channels are selected
by ESC /. To clear the tabs in channel c, use ESC b c 0.
ESC /
Format:
ASCII code:
Decimal :
Hexadecimal:
ESC / c
27 47 c
1B 2F c
Select Vertical Tab Channel
Comments:
This command is used to select the vertical tab channel, with the
value of c from 0 to 7. All subsequent VT commands use the channel
selected by this command. If no channel has been selected, channel 0
is used.
9-18 Command Summary