Epson 4500 - Manual (Page 177)

The Multi-Font Module
There are two ways to select a font from the module:
l
With the printer turned off:
-
remove the Multi-Font Module from its slot on the right side of
the printer
-
dial the rotary switch to the font of your choice
-
return the module to the slot.
When the printer is turned on, the font selected becomes the default
font if the slot is selected with the DIP switch setting or by pressing
the
FONT button on the central panel.
l
Send a software command, ESC k, to the printer to select the
family number. See the Command Summary in Chapter 9 for
details.
Note: Some fonts may not include all of the characters shown on
the samples.
Proportional spacing is not effective when printing any font in this
module.
Numbers 0, 1, and 9 are not used.
Using the Printer Options 5-39