Epson 4500 - Manual (Page 268)

Commands Arranged by Topic
VT
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
V T
11
0B
Tab Vertically
Advances the paper to the next vertical tab position in the channel
selected by ESC /. If no channel has been selected, channel 0 is used.
If no vertical tabs have been set, the paper advances one line.
ESC B Set Vertical Tabs
Format:
ASCII code: E S C B n 1 n 2 . . . 0
Decimal: 27 66 n1 n2 . . . 0
Hexadecimal: 1B 42 n1 n2 . . . 00
Comments:
Sets up to 16 vertical tabs in the current line spacing. Tab settings are
not affected by subsequent changes in line spacing. The tab settings
are entered as
n1, n2, etc.-all from 1 to 225, in ascending order. The
0 value (null) indicates the end of the command. All settings are
stored in channel 0 (see ESC b). ESC B 0 clears the tab settings.
Command Summary 9-17