Epson 4500 - Manual (Page 264)

Commands Arranged by Topic
Vertical Motion
FF
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
FF
12
0C
Form Feed
Prints the data in the print buffer and advances the paper to the top
of the next form according to the current page length. When using a
cut sheet feeder, FF ejects the sheet into the stacker.
ESC C
Format:
ASCII code:
Decimal:
Hexadecimal:
ESC C
n
27 67
n
1B 43 n
Set Page Length in Lines
Comments:
Sets the page length to n lines in the current line spacing. The value
of n must be from 1 to 127 lines. The top of form position is reset to
the current line.
Overrides the DIP switch page length setting.
ESC C0 Set Page Length in Inches
Format:
ASCII code: ESC C 0 n
Decimal: 27 67 0
n
Hexadecimal: 1B 43 00 n
Comments:
Sets the page length to n inches. The value of n must be from 1 to 22.
The top of form position is reset to the current line.
Overrides the DIP switch page length setting.
Command Summary 9-13