Physical characteristics, Error indications – Epson GT-6500 EN User Manual
Page 201

GT-6000 (ES-300C) Technical Data
This appendix provides technical information that is relevant to
software control of the EPSON GT-6000 color image scanner. For
further details about this particular scanner model, see the
GT-6000 user’s guide.
Note for American and Canadian users:
The EPSON GT-6000 scanner is sold under the model name
ES-300C in the United States and Canada. Therefore all the
GT-6000 information in this guide applies to the ES-300C as well.
Physical Characteristics
Function level:
B3
Maximum reading area
216mm
×
297mm
Effective pixels:
2552
×
3508 dots at 300 dpi, 100%
Standard interface:
RS-232C serial
Bi-directional parallel
Optional interface:
SCSI
Serial interface protocols:
Transfer rate:
300, 600, 1200, 2400, 4800, 9600,
and 19200 bps
Stop bit:
2 bits and 1 bit
Parity check:
Odd, Even, None
Error Indications
Scanner errors are displayed by the digital indicator as shown
below. The READY light remains on after a Command Error.
Error name
Digital indicator
READY light
Command Error
E-C
On
Interface Error
E-I
Off
Fatal Error
E-F (Flashes)
Off
Scanner Model Technical Data
B-19